VE-CD Valvenergy Copper Head Drive Distortion Pedal
VE-CD Valve distortion pedal with an all-analog signal path brings iconic amp sounds for your pedalboard. This Copperhead valve distortion pedal recreates a classic full stack amp tone, used for the powerful sound of rock in the 80s. Can be used for overdriven tones or thick distortion. Three output modes - standard pedal, a line-level preamp, and a direct amp-sim.
Iconic amp sounds for your pedalboard.
The Copperhead valve distortion pedal recreates the classic full stack amp tone, used for the powerful sound of hard rock in the 80s. Use it for lightly overdriven tones or thick distortion.
Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.
The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.
These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.
Valve distortion pedal with all-analogue signal path
Tight and precise modern rock tones
Powered by Nutube
Three output modes for use as a pedal or preamp
Selectable analogue cabinet simulator
OLED display with oscilloscope
Active EQ to shape your signal
INPUT jack, OUTPUT jack, DC9V jack, LINK jack
GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch
1 x 9V alkaline battery or 9V center negative AC adaptor
*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.
Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)
DIMENSIONS (W X D X H)
72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the switch and foot rubber)
350 g/12.35 oz. (Excluding the battery)
1 x 9V battery for checking operation
ACCESSORIES (SOLD SEPARATELY)
Specifications and features are subject to change without notice.
All new products are sold with a 3-year manufacturer warranty when bought direct from Vox UK.
Certified Refurbished products also come with a warranty, for more information find out more about our certified refurbished products.
We offer a 30-day returns period on all products purchased directly from Vox UK. More details can be found in our return policy.