VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal
VE-SD Valvenergy Silk Drive - Drive Pedal

Vox

VE-SD Valvenergy Silk Drive - Drive Pedal

£144.00 Sale Save

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analog signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Iconic amp sounds for your pedalboard.

The Silk Drive valve overdrive pedal offers the dynamic clean and creamy overdrive tones of classic boutique amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using.

Valve overdrive pedal with all-analogue signal path
Harmonically rich boutique overdrive tones
Powered by Nutube
Three output modes for use as a pedal or preamp
Selectable analogue cabinet simulator
OLED display with oscilloscope
Active EQ to shape your signal

What is the Nutube?

Nutube is a new vacuum tube that was developed by KORG Corporation in conjunction with Noritake Itron Corporation as an application of vacuum fluorescent display technology. Like a conventional vacuum tube, a Nutube has an anode grid filament structure, and operates as a complete triode tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.

Analogue circuit design with ample headroom

The Valvenergy series is made of all analogue circuits with the 9V power supply voltage boosted to 15V internally. This allows for greater volume and headroom, and delivers an even more dynamic sound. It’s a circuit design that fully utilises the potential of the Valvenergy series.

Three connection modes that you can switch according to your situation

You can switch modes as appropriate for the way in which you’re using the pedal.
STANDARD: The pedal outputs an instrument-level signal. Connect to the input of your guitar amp in the same way as when using a conventional pedal.
PREAMP: The pedal outputs a line-level signal. Connect to the return jack of your amp or to the input of your power amp to then use with a guitar cabinet.
CAB-SIM: The pedal outputs a line-level signal with an analogue cabinet simulator. Connect to your mixer or DAW for direct guitar tones.

Equipped with a channel switching function

You can chain two pedals together with a standard 1/8” stereo cable through the CH-SW (channel switch) jack of each pedal. This allows you to turn one pedal on while bypassing the other, using the system as if you were switching between channels of a guitar amp.
By using a split Y-configuration 1/8” stereo cable you can link three pedals.

OLED display provides visual confirmation of the sound

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings.

INPUTS/OUTPUTS

INPUT jack, OUTPUT jack, DC9V jack, LINK jack


CONTROLS

GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch


POWER SUPPLY*

1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.


CURRENT CONSUMPTION

95 mA


BATTERY LIFE

Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)


DIMENSIONS (W X D X H)

72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)


WEIGHT

350 g/12.35 oz. (Including the battery)


INCLUDED ITEM

1 x 9V battery for checking operation


ACCESSORIES (SOLD SEPARATELY)

AC adaptor


 

Specifications and features are subject to change without notice.

Warranty

All new products are sold with a 3-year manufacturer warranty when bought direct from Vox UK.
Certified Refurbished products also come with a warranty, for more information find out more about our certified refurbished products.

Returns

We offer a 30-day returns period on all products purchased directly from Vox UK. More details can be found in our return policy.